How to install the glass pull handles

Glass door handles are often seen and used commonly in our daily life, and we are easy to ignore it. Damaged glass door handles are an embarrassing problem, and mastering the correct steps is the key step. Today, we will take you to understand the installation steps and classification of glass door handles.

Installation steps of glass door handle. Buy glass door handles that match the door handle opening distance and check that the parts and holes fit tightly. If it's too tight, use a drill to expand it carefully. If it's too loose, wrap tape around the part. First disassemble the handle of the glass door, and then assemble at the handle hole. Apply glass glue to the position where the handle is inserted into the hole. Tighten the base of the handle attached to the glass door with screws to ensure that it does not come loose. The third step of the installation of the glass door handle: After the glass door is connected with the handle, install the other parts of the glass door handle, and then adjust the horizontal position. The handles on both sides of the door should be aligned, as should the handles on both doors. After checking that all parts are securely installed, it can be used normally.